For the smooth and solid installation of the autoclaved aerated bricks, a jointing agent called the AAC Block Adhesives is designed particularly. Cement bonding agents, synthetic resins, minerals and extraordinary additive agents are utilized to fabricate it. And, it is especially designed to hold the AAC Blocks, Fly- Ash Bricks, Concrete Blocks etc, that furnishes a faster construction activity.
Let’s have a look at the advantages of AAC Block Adhesives-
1. Faster construction
The ready-mix feature of the jointing substance of AAC Blocks lessens the procedures required in the construction activity. Unlike in the red bricks where you need to mix up the cement sand mortar in the right proportion, in this case you just need to add water. And, that without a doubt saves time and manual labour.
2. It reduces the layer of joints resulting in a thin layer
In comparison to the cement mortar, AAC Blocks Adhesives require only 3-4 mm of adhesives, whereas in regular brick you need 8-12 mm thick mortar joints. As a result, it minimizes 70% on the usage of the jointing material.
3. No wastage
Since, AAC adhesives are ready to use material, they result in zero wastage and furnishes a smooth and clean work activity. While in regular brick construction, it accounts for up to 30% of waste products.
4. Requires no Curing Process
The process of curing is to allow the concrete to reach its required properties for its deliberate use. And contrary to the regular bricks, where gallons of water goes in preparing the cement mortar, AAC Block Adhesives saves the respective amount of water. As, the water added in the time of manufacturing is sufficient enough to reach its necessary strength for further proceedings.
5. Heat defiant
When you opt for the aerated concrete in your establishment process, it simultaneously incorporates the AAC jointing adhesives, which further altogether adds to the thermal insulation property.
Adhesives Application Procedures –
1. Getting ready with the surface
Firstly, it is necessary to clean the surface to ensure all the dirt, dust and unwanted materials doesn’t spoil the procedures. Second, curing is to be done before applying the adhesives and if there exist any cracks, it must be fixed beforehand.
2. Mix the adhesives
The adhesives must be mixed with water in correct proportions. More than that it is advisable to use clean potable water. Also, application of a mechanical stirrer furnishes smooth workability and better end result.
3. Applying the adhesives
For the proper application of the adhesives use a trowel and apply a thin layer. Maintain a thickness of 3 to 5 mm and continue the procedure with the same density. And the excess adhesives must be wiped off immediately.
Bottomline
Thus, for the smooth construction of your establishment and to reap its various benefits always consider AAC Blocks adhesives. Moreover, under the name of Taj Ready Bond Adhesives we manufacture quality block adhesives that provide solid jointing solutions.
About Taj AAC Blocks
TNE AAC Private Ltd. stands as one of the top mercenary groups in the whole region of North East India. The company deals in manufacturing AAC Blocks, Taj Ready Bond Adhesives and Taj Ready Mix Plaster. And with its quality products and services Taj AAC Blocks is proliferating its wings in the entire region.
To know more about why engineers prefer Taj AAC Blocks visit our page and follow us on Facebook and Instagram